Home >> Build your AURORA FILTER

Build your AURORA FILTER

Complete the following form for each size AURORA FILTER that you are considering. Reference the information under the Filter Selection tab to assist in answering each of the criteria requested. One of our Sales Representatives will contact you to further discuss your needs and review your selections and then we will be happy to make a budget or formal quotation presentation.
Thank you for considering AURORA FILTERS for your specialty filtration needs.

Please select a model from P series or A Series

Please select Size

Model Diameter Filter Area Cake Capacity Slurry Capacity
inches mm ft2 m2 min*L max**L max***L
14 13.75 350 1.0 0.10 2 10 20
Model Diameter Filter Area Cake Capacity Slurry Capacity
inches mm ft2 m2 min*L max**L max***L
14X 13.75 350 1.0 0.10 2 15 30
Model Diameter Filter Area Cake Capacity Slurry Capacity
inches mm ft2 m2 min*L max**L max***L
20 19.75 500 2.1 2.00 4 30 60
Model Diameter Filter Area Cake Capacity Slurry Capacity
inches mm ft2 m2 min*L max**L max***L
26 26 650 3.7 0.34 6 52 104
Model Diameter Filter Area Cake Capacity Slurry Capacity
inches mm ft2 m2 min*L max**L max***L
36 36 914 7.1 0.66 12 100 200
Model Diameter Filter Area Cake Capacity Slurry Capacity
inches mm ft2 m2 min*L max**L max***L
36X 36 914 7.1 0.66 12 167 267
Model Diameter Filter Area Cake Capacity Slurry Capacity
inches mm ft2 m2 min*L max**L max***L
48 48 1210 12.3 1.14 21 174 348
  • X Depict a taller than standard upper chamber shell section
  • * Based on a minimum of 3/4" (18mm) of cake development on the filter plate
  • ** Based on cake thickness equal to the height of the heated jacket section of the upper chamer
  • *** Based on volume below the outlet of the product chute. Greater reactor volumes can be handled by charging the filter is stages as the filtrate is removed during the filtration process.

Please select a suitable material of your filter*

Please Select Process Nozzle Flange Type

Please Select Product Chute Type

Image Code Description
prod-chuteAF-PC-1006" or 8" opening in the shell with rotational 45 deg elbow to a 4", 6" or 8" outlet nozzle
prod-chuteAF-PC-200Fixed 8" oval opening to a conical chute with a 4", 6" or 8" nozzle facing downwards
prod-chuteAF-PC-300Fixed 8" oval opening to a conical chute with a 4", 6" or 8" tee-nozzle with outlet facing downwards and opposite nozzle for sightglass or vent connection
prod-chuteAF-PC-400Fixed 6" straight outlet sloped downward at 45 deg
prod-chuteAF-PC-5006" or 8" opening in the shell with rotational 90 deg elbow to a 4", 6" or 8" outlet nozzle
prod-chuteAF-PC-600Teflon Plug Option - can be incorporated into AF-PC-001 or AF-PC-005 rotational or non-rotational configurations
prod-chuteAF-PC-700Plate flanges at the vessel with a sandwiched direct couple 8" butterfly valve leading to a 4", 6" or 8" outlet ferrule

Name*:
Email*:
Phone*:
Comment*:

"*" marked fields are mandatory