Request A Quote - Aurora Filters

Please select a model from P series or A Series

Please select Size

Model	Diameter		Filter Area		Cake Capacity		Slurry Capacity
	inches	mm	ft²	m²	min^*L	max^**L	max^***L
14	13.75	350	1.0	0.10	2	10	20

Model	Diameter		Filter Area		Cake Capacity		Slurry Capacity
	inches	mm	ft²	m²	min^*L	max^**L	max^***L
14X	13.75	350	1.0	0.10	2	15	30

Model	Diameter		Filter Area		Cake Capacity		Slurry Capacity
	inches	mm	ft²	m²	min^*L	max^**L	max^***L
20	19.75	500	2.1	2.00	4	30	60

Model	Diameter		Filter Area		Cake Capacity		Slurry Capacity
	inches	mm	ft²	m²	min^*L	max^**L	max^***L
26	26	650	3.7	0.34	6	52	104

Model	Diameter		Filter Area		Cake Capacity		Slurry Capacity
	inches	mm	ft²	m²	min^*L	max^**L	max^***L
36	36	914	7.1	0.66	12	100	200

Model	Diameter		Filter Area		Cake Capacity		Slurry Capacity
	inches	mm	ft²	m²	min^*L	max^**L	max^***L
36X	36	914	7.1	0.66	12	167	267

Model	Diameter		Filter Area		Cake Capacity		Slurry Capacity
	inches	mm	ft²	m²	min^*L	max^**L	max^***L
48	48	1210	12.3	1.14	21	174	348

X Depict a taller than standard upper chamber shell section
* Based on a minimum of 3/4" (18mm) of cake development on the filter plate
** Based on cake thickness equal to the height of the heated jacket section of the upper chamer
*** Based on volume below the outlet of the product chute. Greater reactor volumes can be handled by charging the filter is stages as the filtrate is removed during the filtration process.

Please select a suitable material of your filter*

-S 316L SS

-E 316L SS with ETFE Lining

-C C22 Hastelloy

Please Select Process Nozzle Flange Type

-S Sanitary Ferrules

-AF ANSI 150# RF Flanges

-DF DIN Flanges

-LAF Lapjoint ANSI Flanges

-LDF Lapjoint DIN Flanges

Please Select Product Chute Type

Image	Code	Description
	AF-PC-100	6" or 8" opening in the shell with rotational 45 deg elbow to a 4", 6" or 8" outlet nozzle
	AF-PC-200	Fixed 8" oval opening to a conical chute with a 4", 6" or 8" nozzle facing downwards
	AF-PC-300	Fixed 8" oval opening to a conical chute with a 4", 6" or 8" tee-nozzle with outlet facing downwards and opposite nozzle for sightglass or vent connection
	AF-PC-400	Fixed 6" straight outlet sloped downward at 45 deg
	AF-PC-500	6" or 8" opening in the shell with rotational 90 deg elbow to a 4", 6" or 8" outlet nozzle
	AF-PC-600	Teflon Plug Option - can be incorporated into AF-PC-001 or AF-PC-005 rotational or non-rotational configurations
	AF-PC-700	Plate flanges at the vessel with a sandwiched direct couple 8" split butterfly valve leading to a 4", 6" or 8" outlet ferrule